toreping.blogg.se

9x12 envelope printing
9x12 envelope printing











NOTE: With Software Version, for fully adjustable trays, there may or may not be a prompt to confirm the tray settings.

  • At the control panel, select the correct paper size, type, and color.
  • Adjust the guides until they touch the edges of the envelopes.
  • For envelopes with the flap on a short edge, load envelopes with the flaps closed, flaps up, and flaps on the leading edge, toward the right.
  • For envelopes with the flap on a long edge, load envelopes with the flaps closed, flaps up, and flaps on the leading edge, toward the right.
  • Move the width guides to the edges of the tray.
  • Remove any paper or envelopes that are a different size or type.

    9x12 envelope printing

    Load Envelopes in the Bypass Tray (Tray 5): Do not use envelopes with press and seal flaps.Do not use envelopes with heat activated glue.Use envelopes that lie flat on a surface.

    #9x12 envelope printing driver#

    In the print driver software, select Envelope as the paper type.Remove air bubbles from the envelopes before loading them into the tray by setting a heavy book on top of them.Excessive moisture can cause the envelopes to seal before or during printing. Store unused envelopes in their packaging to avoid excess moisture and dryness which can affect print quality and cause wrinkling.Maintain constant temperatures and relative humidity.

    9x12 envelope printing

    If you do not get the desired results, try another envelope brand. Print quality depends on the quality and construction of the envelopes.Do not use envelopes with windows or metal clasps.DocuShare Enterprise Content ManagementĮnvelopes can be printed only from Tray 5, or from Tray 1 if the optional envelope tray is installed.įor additional information about paper and paper tray specifications, refer to Paper and Paper Tray Specifications.











    9x12 envelope printing